Licensed & Insured · MD License 7788 · Family-Owned Since 2005

Baltimore County, MD

Electrician in Butler, MD

Barn lights that dim when a heater kicks on, a well pump that quit after a storm, or a buried feeder nobody has looked at in decades? We’re a licensed, family-owned Maryland electrician (MD License 7788) taking scheduled work in Butler. Text a short video to 410-808-4215 to get started.

BGE TERRITORY

BARNS & FEEDERS

MD LIC #7788

Get a free estimate

We reply within 24 hours. Emergencies: 410-808-4215
Form B — Quick Estimate

MD License 7788

Licensed & insured

Family-owned

Since 2005

Veteran-owned

Start here

Power that has to travel a long way

Butler is horse country, out along Falls Road in northwestern Baltimore County. Properties here tend to spread out: a house, a barn or stable, a run-in shed, a well, sometimes a detached garage or an arena. For an electrician in Butler, that means most calls are about getting power safely from the house panel to somewhere a few hundred feet away, and keeping it there through storms. You can see how we cover the wider county on our Baltimore County electrician page.

We’ll be straight about distance. Our base is in Darlington, in northern Harford County, and Butler sits west of Hunt Valley and Sparks. It’s a longer drive for us than most of the towns we serve, so we book Butler work ahead instead of promising same-hour arrival. For outbuilding wiring, generator hookups, inspections and upgrades, that works well, and the owner, Mike Cliffe, is still the one on the job. Most of our daily work is closer to our Harford County home.

The quickest start is a short video of the problem or the project texted to 410-808-4215. We’ll tell you what we see and what we’d want to check in person.

Butler at a glance

Not sure we cover your street? Call or text 410-808-4215.

Common calls

Common electrical calls in Butler

On spread-out horse and farm properties, the trouble usually sits somewhere between the house panel and the far building.

Barns and stables on long feeders

A barn a few hundred feet from the house needs a feeder sized for that distance, not just for the load. Too small a wire and the voltage sags under load, so lights dim, fans slow down and motors run hot. Older properties often have a feeder that was sized for a couple of bulbs and has since picked up fans, a water heater, a tack-room heater and an arena light or two.

We measure voltage at both ends with the loads running, check the wire size and the connections, and tell you whether the feeder can stay, needs a larger conductor, or needs a subpanel at the barn with its own grounding.

Heated waterers and tank heaters in winter

Come January, stock tank heaters and heated buckets go back on. They draw real current, they sit in wet places, and they’re often plugged into an extension cord run across the aisle. That’s the setup that trips breakers and wears out outlets. A dedicated GFCI-protected circuit with weather-rated outlets where the waterers sit is safer and trips less.

Well pumps after a storm

When the taps go dry after a thunderstorm, the pump is not always the culprit. The pressure switch, the control box, a tripped or damaged breaker, or a lightning-hit connection can all stop a well. We test each piece in order so you’re not paying to pull a pump that was fine.

Keeping water and feed running in an outage

On a horse property, an outage isn’t an inconvenience for long. You need the well pump, the fridge, the furnace blower and maybe the barn waterers. A generator inlet with an interlock on the panel lets a portable generator run the circuits you pick, without backfeeding the BGE lines.

Lighting the lane and the barn aisle

Long lanes and dark barn aisles are where people trip and where a horse spooks. LED fixtures rated for damp, dusty locations, with photocells or motion sensors, put light where you need it at feeding time without leaving everything on all night.

A farmhouse wired in stages

Older farmhouses rarely have one wiring story. You may find original runs from one era, an addition from another, and a kitchen redone more recently, all landing in a panel that has been added to over the years. Two-prong outlets, doubled-up breakers and splices without a box are the usual finds. We map what’s there before recommending anything, and phase the work so you’re not opening every wall at once.
Underground conduit laid in a trench to feed a detached garage

BURIED FEEDERS

Sized for the distance, not just the load

Services

Services for Butler homeowners

These are the services Butler-area properties ask us about most. Each page explains the work, the permit side and what changes the price.
Open trench with gray conduit for an underground feeder running from a house to a detached garage.

01

Feeders, subpanels and outlets for barns, run-in sheds, garages and arenas.
Electrician testing a well pump pressure switch beside a pressure tank in a rural Maryland home

02

Testing and repair of well circuits, pressure switches and control boxes.
Generator interlock kit on a breaker panel in a Harford County, Maryland home

03

Run a portable generator safely through your panel during BGE outages.
Electrician installing a motion-sensor security floodlight on a Harford County home

04

Lane, barn and yard lighting with sensors and photocells.

How it works

When the barn lights dim at feeding time

YOU NOTICE

You notice

The barn lights dip and the fans slow every time the water heater or a tank heater switches on.

WHAT'S HAPPENING

What's happening

A long feeder that’s too small for today’s load drops voltage under current, or a buried splice is loose and heating up.

WHY IT MATTERS

Why it matters

Low voltage makes motors run hot and shortens their life, and a loose splice in the ground can fail without warning.

WHAT WE DO

What we do

We measure voltage at both ends under load, find the weak point, and quote a fix: new connections, a larger feeder, or a barn subpanel.

Free video estimate

Need a Quick Quote?

Send a short video to 410-808-4215 showing the area where you’re experiencing an issue or where you’d like work completed. Please include as much detail as possible so we can provide the most accurate estimate.
Please Note: Quotes provided from videos are estimates based on the information shown. If additional issues, repairs, materials, or site conditions are discovered that were not visible in the video, the final cost may vary. A more detailed video helps ensure the most accurate quote.

Permits, code and utility

Permits, code and utility in Butler

Butler is in Baltimore County, so permits go through the county office in Towson and the utility is BGE.
In Baltimore County, almost every electrical job needs a permit, and a county-registered licensed electrical contractor has to be the one who pulls it. That includes new feeders to barns and sheds, subpanels, generator inlets and most new circuits. We pull the permit when the job requires one, build to the 2023 NEC the county enforces for permits issued after August 31, 2023, and meet the inspector. On outbuilding work the inspector looks closely at burial depth, the grounding at the far building, and GFCI protection.

Your power comes from BGE. Some farm properties have a second meter for a barn or arena, and some run everything from the house service. Either can work. If a new barn load means a bigger service or a new meter, we coordinate the disconnect and reconnect with BGE and tell you what to expect for timing.

Baltimore County permit file

PERMIT OFFICE

Baltimore County Permits, Approvals & Inspections, 111 W. Chesapeake Ave, Towson · 410-887-3900

CODE IN FORCE

2023 NEC for permits issued after Aug 31, 2023

UTILITY

BGE

01

Permit

We apply for the permit before work starts, when the job requires one.

02

Work to code

We wire it to the code your county enforces, with the right parts for the job.

03

Inspection

The county inspector checks the work before walls close or the power is restored.

04

Walkthrough

We show you what we did, what passed and anything worth planning for next.
Michael Cliffe standing behind the Snapper Electric truck with ladders on the roof rack

SINCE 2005

Owner on every job

Why neighbors call us

Why neighbors in Butler call Snapper Electric

We’re a small, family-owned company, and Mike Cliffe, the owner, does the diagnosis himself. He’s held Maryland License 7788 since we started in 2005, he’s a former U.S. Marine, and he’d rather explain what he found than hand you a number with no reasoning behind it. On farm properties that matters, because the right fix for a barn feeder depends on distance, load and what’s already in the ground.

You get up-front pricing before any work starts, a callback within 24 hours, and a comfort call before we arrive. Every service call includes a free 7-point safety evaluation, so if we spot a problem in the house panel while we’re there for the barn, you’ll hear about it. We stand behind the work with our 100% satisfaction guarantee.

Reviews

What neighbors say

Posted on Google Google
Kyle Harbaugh profile picture
Kyle Harbaugh
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I called Snapper Electric for an after-hours service late on a Sunday evening. Unfortunately, they weren't able to make it to my house but diagnosed the problem over the phone and got me on the right track calling BGE. This is what great customer service is all about! In the past, I've used them from everything from light installs to outlet rebuilds. All the work has always been done to perfection.
Posted on Google Google
Alice Alice profile picture
Alice Alice
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Replaced our outdated electrical panel and fixed a few wiring issues the same day. Professional, punctual, and everything works perfectly now.
Posted on Google Google
monte combs profile picture
monte combs
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
And his service remains 5 star. This was the first time that I have used Mike but rest assure it will not be the last. He was quick, he was honest and his work was exemplary and his prices are more than reasonable. Keep up the good work SNAPPER!
Posted on Google Google
Linda Diaz profile picture
Linda Diaz
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Maryland.... NEED AN ELECTRICIAN?..... Look no further! Words escape me at the amazing customer service delivered by Mike Cliffe(Master Elec.) at Snapper Electric. I called to inquire about services to uninstall my Chargepoint EV home charger. Michael said he can come by to work on this for me. He asked me to send him pics so he can advise properly. I sent the pics and Michael responds back with where to look and how to uninstall. I was shocked! No call charge. No service charge. Just the instructions and he wishes me an amazing weekend!!! Honest and great customer service 👍
Posted on Google Google
Mark C profile picture
Mark C
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Mike came out, quickly diagnosed the problem and fixed it very quickly. He is great, and very reasonably priced! Would definitely use them again!
Posted on Google Google
M G profile picture
M G
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great work done after a thoughtful discussion on all options
Posted on Google Google
Steve Somers profile picture
Steve Somers
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I bought a new electric range and didn't realize the old one was hard wired in. I called Mike and he was out right away to get a new outlet installed for the new range. I highly recommend!! Super Fast and Professional!!!
Posted on Google Google
John Brodrick profile picture
John Brodrick
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I have had them do a few jobs for me including installing a generator outlet for the house and some wiring throughout the house. He took the time to explain options and what was best to fit my needs. Overall very professional, on time and did great work. Highly recommended.
Posted on Google Google
Ricky Godbolt profile picture
Ricky Godbolt
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend Snapper Electric.
Mike did a great job - a very creative and sensible solution to getting power out to my garage. Very accommodating to my budget and time. Mike and his son make a great team. This is my second time getting work done by him.
Phil Mackenzie
Garage power
They provided guidance in selecting and installed a back-up generator as well as put lights in several closets. The electrician was pleasant, cleaned up after projects and provided in-depth hands on instruction on use of generator. He also provided easy-to-follow instruction on electric panel to guide us as we used the generator. Definitely will use his services in future.
Thomas Heimiller
Kingsville, MD
Mike was able to come out and assist us very quickly. He was polite and explained exactly what needed to be done to fix our problem. Very professional work done in a timely manner. Definitely recommend!
Shannon Baumgart
Google

Nearby areas

Nearby areas we also serve

We also take work across the horse-farm and estate country north and east of Butler.

From the blog

Read more about this

Well pump, sump, fridge and furnace loads on rural properties.
When an outbuilding needs its own panel, and what that involves.

FAQ

Questions from Butler property owners

Yes, for scheduled work. Butler is a longer drive from our Darlington base than our Harford County towns, so we book it ahead and give you a clear arrival window with a comfort call. For an emergency, call 410-808-4215 any time and we’ll tell you honestly how soon we can get there, so you can plan around it.
Usually, yes. A subpanel at the barn fed from the house lets each barn circuit have its own breaker close to where you use it. The feeder needs four wires (two hots, a neutral and a ground), and the barn needs its own grounding electrode. We size the feeder for the distance and the load you plan to run.
It depends on the wiring method and where it runs. Under the NEC, direct-buried cable generally needs 24 inches of cover and PVC conduit 18 inches in most yard and pasture locations, with different rules under driveways. We check the route for rock, fence lines and existing lines before anyone digs, and the county inspector checks the trench.
Yes. Butler gets its power from BGE, like the rest of Baltimore County. If a new barn or arena load needs a service upgrade or a separate meter, we handle the paperwork and coordinate the utility side with BGE, so you’re not stuck in the middle.
Winter is when tank heaters, heated buckets and space heaters come out, and they often share one circuit with lights and fans. Add a worn outlet or a long extension cord and the breaker trips. A ground-fault in a wet heater can trip a GFCI too. We find which one it is and split the load properly.
Most can, if the generator is large enough and has a 240-volt outlet. Well pumps draw a surge when they start, so we look at the pump’s nameplate before you buy. With an inlet and interlock, you choose which circuits run, such as the well, the fridge and the furnace blower.
In Baltimore County, nearly all electrical work needs a permit pulled by a registered electrical contractor, and a new feeder to an outbuilding is no exception. We pull it when the job requires one, build to the 2023 NEC, and meet the inspector, so the work is on record if you sell.
Yes. Text a short video to 410-808-4215 showing the panel, the barn or shed, and roughly where the power needs to go. We’ll send a starting estimate. It’s based on what the video shows, so the final price is confirmed once we see the route and the existing wiring in person.
Michael Cliffe, owner of Snapper Electric

Reviewed by Michael Cliffe, Owner · Maryland State Licensed Contractor, License 7788

Written by the Snapper Electric team · Last updated October 25, 2026

Electrical work can be dangerous. The information on this page is general guidance for homeowners in Maryland and is not a substitute for an on-site assessment by a licensed electrician. Always turn off power at the breaker before touching any wiring, and call 911 if you smell burning, see sparks, or have an active electrical fire.

Ready when you are.

Call, text, or send the form. We’ll tell you what we see, what it means for your home, and what it costs before any work starts.
Office hours Mon–Sat 8 AM–5 PM · 24/7 for electrical emergencies
Snapper Electric turtle mascot