Licensed & Insured · MD License 7788 · Family-Owned Since 2005

Harford County, MD

Electrician in Clayton, MD

Starting a kitchen update, tired of a dark living room, or wondering whether your panel can take an EV charger? Snapper Electric is a family-owned electrician licensed in Maryland and based in Harford County. Call or text 410-808-4215, or send a short video of the space.

HARFORD COUNTY

MD LIC #7788

UP-FRONT PRICING

Get a free estimate

We reply within 24 hours. Emergencies: 410-808-4215
Form B — Quick Estimate

MD License 7788

Licensed & insured

Family-owned

Since 2005

Veteran-owned

Start here

Planning electrical work in Clayton

Clayton is a small Harford County community, and we don’t have a list of local landmarks to point to. What we do have is two decades of work in homes like yours across the county. As your electrician in Clayton, we’ll look at the age of the house, the panel and the circuits in the rooms you want to change, and tell you what the project really needs.

Snapper Electric is owned by Michael Cliffe, Maryland License 7788, and has been family-run since 2005. Our base is in Darlington and we serve every corner of Harford County. If you’d like to see the kind of remodel and lighting work we do near the county seat, our Bel Air electrician page is a good place to start.

Most projects begin with a short conversation about what you want the room to do. From there we work backward to the circuits, boxes and permits it takes.

Clayton at a glance

Not sure we cover your street? Call or text 410-808-4215.

Common calls

Common electrical calls in Clayton

Remodel, lighting and upgrade projects make up much of this list, with the repairs that come up along the way.

Kitchen updates and new appliances

A kitchen update often means more than new fixtures. Current code calls for two 20-amp small-appliance circuits on the counters, GFCI protection, and dedicated circuits for the dishwasher, disposal and microwave. Swapping a gas range for an induction one adds a 240-volt circuit. We map it all before the cabinets go in.

Islands need outlets placed to the 2023 code, and under-cabinet and pendant lighting is far easier to wire while the walls are open. If the panel is full, we’ll tell you early, so the budget isn’t surprised halfway through.

Recessed lighting in rooms with one ceiling light

Many living rooms and bedrooms were built with a single ceiling fixture or a switched outlet for a lamp. Slim LED recessed lights fit into existing ceilings with small openings. We lay them out so the light is even, not a row of spotlights.

We also check what’s above the ceiling first. Insulation, ductwork and joists set where each light can go, and lights under an attic need IC-rated housings or canless fixtures that can touch insulation safely.

Smart switches and dimmers

Smart switches often need a neutral wire in the switch box, which some older boxes don’t have. We check each box first, then recommend switches that work with your wiring and your bulbs, so the lights don’t buzz or flicker.

EV chargers and panel capacity

A Level 2 charger is a large, long-running load. We do a load calculation first, then size the charger and circuit to what your service can carry, with a load-managed option if it’s close.

Breakers that trip with no clear pattern

Random trips can come from an AFCI breaker reacting to a damaged cord or a loose connection, a worn breaker, or an overloaded circuit. We test rather than guess, and we explain what tripped and why.

A whole-home safety check

If you’ve just moved in, or the house hasn’t had an electrician through it in years, a safety inspection covers the panel, grounding, GFCIs, AFCIs, outlets and alarms in one visit, with a written list of anything that needs attention.
Electrician installing a slim LED recessed light in a Bel Air, MD living room ceiling

LED RECESSED

Even light from slim canless fixtures

Services

Services for Clayton homeowners

Four services that cover most projects we expect in Clayton. Every visit includes our free 7-point safety evaluation.
Kitchen remodel in progress with new cabinets, island boxes and range circuit ready for wiring

01

Circuits, GFCI protection and lighting planned before the cabinets go in.
Smart dimmer switch installed in a Maryland living room

02

Dimmers, smart switches and scenes that work with your wiring.
Wall-mounted Level 2 EV charger plugged into a white SUV in a home garage

03

Level 2 chargers sized to your panel after a load calculation.
Electrician testing a living room outlet with a plug-in tester during a home electrical safety inspection in Bel Air, MD

04

One visit, a full check, and a written list you can plan from.

How it works

One Clayton example: the dimmer that buzzes

YOU NOTICE

You notice

You put LED bulbs in the dining room fixture, and now the dimmer hums and the lights flicker at the low end.

WHAT'S HAPPENING

What's happening

The old dimmer was built for incandescent bulbs and can’t control the LED drivers smoothly at low settings.

WHY IT MATTERS

Why it matters

A mismatched dimmer wears out bulbs early, and a dimmer running warm or buzzing should be replaced.

WHAT WE DO

What we do

We fit a dimmer rated for LED loads, set its low-end trim to your bulbs, and confirm the box and connections are sound.

Free video estimate

Need a Quick Quote?

Send a short video to 410-808-4215 showing the area where you’re experiencing an issue or where you’d like work completed. Please include as much detail as possible so we can provide the most accurate estimate.
Please Note: Quotes provided from videos are estimates based on the information shown. If additional issues, repairs, materials, or site conditions are discovered that were not visible in the video, the final cost may vary. A more detailed video helps ensure the most accurate quote.

Permits, code and utility

Permits, code and utility in Clayton

Clayton projects follow Harford County’s permit rules, and most county addresses are served by BGE.
The Harford County Permit Center at 220 S. Main St in Bel Air handles electrical permits, and a licensed electrical contractor applies for them. The county adopted the 2023 National Electrical Code through Bill 24-06, with local amendments. Kitchen and bath remodels, new lighting circuits, EV chargers and panel work generally need a permit and a rough-in or final inspection. Swapping a light fixture or switch on an existing box usually doesn’t. We pull the permit when the job requires one.

On a remodel, the electrical inspection often has to happen before the walls close up, so we schedule it around your other trades. Most of Harford County is BGE; a small northern area near the Pennsylvania line is Delmarva Power. If your project needs a service upgrade, we coordinate the meter work with the utility that serves your address.

Harford County permit file

PERMIT OFFICE

Harford County Permit Center, 220 S. Main St, Bel Air · 410-638-3363

CODE IN FORCE

2023 NEC, adopted by Bill 24-06 with county amendments

UTILITY

BGE (Delmarva Power in a small northern slice near the PA line)

01

Permit

We apply for the permit before work starts, when the job requires one.

02

Work to code

We wire it to the code your county enforces, with the right parts for the job.

03

Inspection

The county inspector checks the work before walls close or the power is restored.

04

Walkthrough

We show you what we did, what passed and anything worth planning for next.
Three pendant lights over a kitchen island in a Fallston, Maryland home

SINCE 2005

Owner on every job

Why neighbors call us

Why neighbors in Clayton call Snapper Electric

Projects go better when the person pricing them also understands them. Michael Cliffe is Snapper Electric’s licensed owner (Maryland License 7788), a former U.S. Marine, and he’s been running the company since 2005. He’ll talk through placement, brightness and switching with you, not just quote a number.

Prices are up front, before work starts. We work cleanly, protect floors, and clean up when we’re done. Our technicians are background-checked and drug-free, every service call includes a free 7-point safety evaluation, and the work carries our 100% satisfaction guarantee. Veterans, teachers and seniors get a discount.

If a project uncovers a problem behind a wall, we stop, show you, and price it before going further.

Reviews

What neighbors say

Posted on Google Google
Kyle Harbaugh profile picture
Kyle Harbaugh
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I called Snapper Electric for an after-hours service late on a Sunday evening. Unfortunately, they weren't able to make it to my house but diagnosed the problem over the phone and got me on the right track calling BGE. This is what great customer service is all about! In the past, I've used them from everything from light installs to outlet rebuilds. All the work has always been done to perfection.
Posted on Google Google
Alice Alice profile picture
Alice Alice
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Replaced our outdated electrical panel and fixed a few wiring issues the same day. Professional, punctual, and everything works perfectly now.
Posted on Google Google
monte combs profile picture
monte combs
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
And his service remains 5 star. This was the first time that I have used Mike but rest assure it will not be the last. He was quick, he was honest and his work was exemplary and his prices are more than reasonable. Keep up the good work SNAPPER!
Posted on Google Google
Linda Diaz profile picture
Linda Diaz
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Maryland.... NEED AN ELECTRICIAN?..... Look no further! Words escape me at the amazing customer service delivered by Mike Cliffe(Master Elec.) at Snapper Electric. I called to inquire about services to uninstall my Chargepoint EV home charger. Michael said he can come by to work on this for me. He asked me to send him pics so he can advise properly. I sent the pics and Michael responds back with where to look and how to uninstall. I was shocked! No call charge. No service charge. Just the instructions and he wishes me an amazing weekend!!! Honest and great customer service 👍
Posted on Google Google
Mark C profile picture
Mark C
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Mike came out, quickly diagnosed the problem and fixed it very quickly. He is great, and very reasonably priced! Would definitely use them again!
Posted on Google Google
M G profile picture
M G
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great work done after a thoughtful discussion on all options
Posted on Google Google
Steve Somers profile picture
Steve Somers
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I bought a new electric range and didn't realize the old one was hard wired in. I called Mike and he was out right away to get a new outlet installed for the new range. I highly recommend!! Super Fast and Professional!!!
Posted on Google Google
John Brodrick profile picture
John Brodrick
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I have had them do a few jobs for me including installing a generator outlet for the house and some wiring throughout the house. He took the time to explain options and what was best to fit my needs. Overall very professional, on time and did great work. Highly recommended.
Posted on Google Google
Ricky Godbolt profile picture
Ricky Godbolt
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend Snapper Electric.
They provided guidance in selecting and installed a back-up generator as well as put lights in several closets. The electrician was pleasant, cleaned up after projects and provided in-depth hands on instruction on use of generator. He also provided easy-to-follow instruction on electric panel to guide us as we used the generator. Definitely will use his services in future.
Thomas Heimiller
Kingsville, MD
My wife was home during installation. She was pleased with the time he took with her to discuss and plan light placement. I was told he worked cleanly and diligently. He was very respectful of our home.
Brian Ferullo
Bel Air, MD
I just finished putting the power cord on the dryer and plugged it in, only to find out that the previous owner did not even have the plug itself hooked up to the electrical box. Mike showed up the same day that I called and installed a separate breaker for the dryer.
Matt Gonzales
Dryer circuit

Nearby areas

Other Harford County towns we serve

If another page is a closer fit for your address, these Harford County towns each have their own.

From the blog

Read more about this

The full list, from the panel to the alarms.
How many lights a room needs and where they go.

FAQ

Questions from Clayton residents

Yes. Clayton is in Harford County, and we work throughout the county from our Darlington base. Call or text 410-808-4215 with your address and project, and we’ll tell you when we can come out.
It depends on the room size, ceiling height and what the room is for. As a rough guide, lights spaced about half the ceiling height from the walls and four to six feet apart give even light in a typical room. We lay it out with you before cutting.
Many smart switches need a neutral wire, and older switch boxes may not have one. Some three-way setups also need specific wiring. If you’re not comfortable working inside a live box, we can check the boxes and install them correctly.
If the remodel adds or moves circuits, outlets or lighting, yes. Harford County expects a permit and inspection, usually before the walls are closed. We pull the permit when the job requires one and coordinate the inspection with your other trades.
Most of Harford County is on BGE, with Delmarva Power only in a small northern area near the Pennsylvania line. Your electric bill shows which one serves you.
Maybe. Both are 240-volt loads, and together they can push a 100-amp service past its limit. A load calculation shows what your home uses now and what’s left. If it’s tight, a load-managed charger or a service upgrade are the usual options.
We check the panel and breakers, grounding and bonding, a sample of outlets for wiring faults, GFCI and AFCI protection, smoke and CO alarms, and visible wiring in the basement and attic. You get a written list, ranked by urgency, with prices.
Yes. On remodels we usually come in twice: rough-in before insulation and drywall, and trim-out after paint. Tell us the schedule and we’ll fit the inspection between the two.
Yes. Text a video of the room and the panel to 410-808-4215 for a starting estimate. The final price is confirmed on site, because framing, insulation and existing wiring don’t always show on camera.
Yes, and it often saves a trip. Porch, garage and driveway lights can share the visit, as long as the outdoor boxes are rated for wet locations and the circuit has room. We can put them on a photocell, a timer or a motion sensor.
Michael Cliffe, owner of Snapper Electric

Reviewed by Michael Cliffe, Owner · Maryland State Licensed Contractor, License 7788

Written by the Snapper Electric team · Last updated October 25, 2026

Electrical work can be dangerous. The information on this page is general guidance for homeowners in Maryland and is not a substitute for an on-site assessment by a licensed electrician. Always turn off power at the breaker before touching any wiring, and call 911 if you smell burning, see sparks, or have an active electrical fire.

Ready when you are.

Call, text, or send the form. We’ll tell you what we see, what it means for your home, and what it costs before any work starts.
Office hours Mon–Sat 8 AM–5 PM · 24/7 for electrical emergencies
Snapper Electric turtle mascot