Licensed & Insured · MD License 7788 · Family-Owned Since 2005

Lighting & Fans › Towson, MD

Lighting installation in Towson, MD

A 1930s living room lit by one lamp, a ceiling fixture with crumbling wires behind it, or a condo kitchen that needs more than one light? We add and replace lighting, fans and controls in Towson homes, working carefully through plaster and older wiring.

ZIP 21204 · 21286

BGE TERRITORY

MD LIC #7788

Get a free estimate

We reply within 24 hours. Emergencies: 410-808-4215
Form B — Quick Estimate

MD License 7788

Licensed & insured

Family-owned

Since 2005

Veteran-owned

Start here

New light in Towson's older houses

Many Towson lighting jobs happen in houses built in the 1920s through the 1940s: the brick rowhouses, colonials and Tudor-style homes of neighborhoods like Rodgers Forge and Stoneleigh. They were built for a ceiling light in the hall, a fixture over the dining table and lamps nearly everywhere else. For the full menu, see lighting and fan installation; our Towson electrician page covers the rewiring, service upgrades and repairs these homes often need alongside new lighting.

In a house this age, the fixture is the easy part. What matters is the box it hangs from, the wire feeding it and the plaster it sits in. We check all three before recommending anything, and we tell you up front if the wiring behind an old fixture should be replaced rather than reconnected.

Lighting in Towson

Not sure we cover your street? Call or text 410-808-4215.

Why it comes up here

Why Towson homes need careful lighting work

Heat is the first issue. Decades of incandescent bulbs in a closed ceiling fixture bake the wire insulation right above it. In older Towson homes we often open a fixture and find cloth or rubber insulation that cracks when it’s bent. Reconnecting a new fixture to wire like that is how a light that worked for a week starts to flicker. Many new fixtures are also labeled for supply wire rated at a higher temperature than original wiring was, so a short new run to the box may be the right fix.

The boxes themselves are often shallow pancake boxes or old metal boxes with no ground, sometimes fastened to lath rather than framing. They can hold a light fixture but not a fan or a heavy chandelier. In houses where parts of the original wiring are still in service, including knob-and-tube in the attic or walls, we look at what feeds the box before we touch the fixture.

Then there’s the plaster. Plaster and lath ceilings crack if they’re cut carelessly, and patching them invisibly takes skill. Adding recessed lights or a new ceiling fixture in a Towson living room is very doable, but it calls for planning the cable route through the attic or from below, scoring the openings slowly and using fixtures that suit a shallow ceiling.

Condos and apartments around the town center bring different limits. Some buildings have concrete ceilings that rule out recessed fixtures, and most associations have rules on work hours and access. Inside the unit, the usual requests are more light in the kitchen, a fan in the bedroom and switches that work with LED bulbs.
Aging cloth-covered wiring stapled to basement joists in an older Maryland home.

ORIGINAL WIRING

Brittle cloth insulation found behind old fixtures
Electrician's hands fishing new cable through a small opening in a plaster wall during a rewire.

THROUGH PLASTER

Cable fished with as little wall damage as we can manage

What we do

What we install in Towson homes

Where a room has no ceiling light, we add one. In a two-story house we can usually reach the second-floor ceilings from the attic, and on the first floor we route cable from the basement up an interior wall and across the joist bay, opening only small access holes. For more even light, slim LED recessed fixtures need very little depth, which suits ceilings with limited room above. Wall sconces on either side of a fireplace or along a stair are another way to light an older room without a lot of ceiling work.

When we replace an existing fixture, we look behind it first. Brittle wire gets a new short run to a proper box, ungrounded metal boxes are replaced or grounded where we can, and bedroom boxes get a fan-rated box on a brace before a ceiling fan goes up. Heavy dining-room chandeliers go on a box and support rated for their weight. A period fixture you love can often stay: an LED retrofit or a rewire of the fixture itself may be enough. Bathrooms with no vent at all often get an exhaust fan ducted outside on the same visit.

Controls take extra thought here. Many switch boxes in older Towson homes have no neutral wire, which many smart switches need. We check first, then pick a model that works without one or run the wire it needs. In kitchens, under-cabinet lights and pendants or new ceiling lights make a big difference in rooms that were small and dark to begin with.

Outside, rowhouse back doors and alleys are where lighting matters most. We install motion and dusk-to-dawn lights on weatherproof boxes over the rear door, and replace front porch fixtures whose boxes have rusted through. On detached homes with gardens, low-voltage landscape lighting lights the walk without trenching through mature plantings.

How the visit goes

How a Towson lighting visit goes

Older houses reward a careful look before the work begins. Here’s how we handle it.
Michael Cliffe standing behind the Snapper Electric truck with ladders on the roof rack

SINCE 2005

Owner-led jobs across three counties

1

Photos first

Text 410-808-4215 a video of the room, the fixture and the switches, and a photo of the panel. If you’re in a condo, send the association’s contractor rules too.

2

Look behind the fixture

On site we open the existing box, check the wire and the ground, and look at the attic or basement route. You get a layout and a written price before any plaster is cut.

3

Careful install

Floors are covered, plaster is scored and cut slowly, and dust is controlled. Old wiring we replace is removed or made safe and labeled.

4

Test, patch plan and permit

We test every light and control with you, tell you which openings need a plaster patch, and meet the Baltimore County inspector when the job needs a permit.

Free video estimate

Need a Quick Quote?

Send a short video to 410-808-4215 showing the area where you’re experiencing an issue or where you’d like work completed. Please include as much detail as possible so we can provide the most accurate estimate.
Please Note: Quotes provided from videos are estimates based on the information shown. If additional issues, repairs, materials, or site conditions are discovered that were not visible in the video, the final cost may vary. A more detailed video helps ensure the most accurate quote.

Cost factors

What moves the price of lighting work in Towson

In older Towson homes, the condition behind the ceiling matters more than the fixture you choose.

Wire condition at the box

Brittle insulation means a new short run to the box, which adds time to a fixture swap.

Plaster or drywall

Plaster takes slower cutting and more careful patching than drywall.

Route for new cable

Attic or basement access keeps it simple; a first-floor ceiling under finished rooms takes more planning.

Box replacement

Pancake and ungrounded boxes often need replacing, especially for fans and heavy fixtures.

Switch neutrals

Smart switches in boxes without a neutral may need a different model or a new wire.

Condo logistics

Building rules on hours, elevators and parking can affect scheduling.
A video gives you a starting estimate; opening the existing box on site confirms it. Ask about our veteran, teacher and senior discounts.

Permits

Permits in Baltimore County

Baltimore County’s permit office is right in Towson, at Permits, Approvals and Inspections, 111 W. Chesapeake Ave (410-887-3900). The county requires a permit for nearly all electrical work, pulled by a licensed electrical contractor registered with the county, and permits issued after August 31, 2023 are inspected to the 2023 National Electrical Code.

That covers new fixture locations, new circuits and any wiring we replace behind an old fixture. We take care of the permit when the job requires one and are there when the inspector comes. If your condo association needs a copy of our insurance or the permit before we start, we provide it. On a house where we’ve found brittle or knob-and-tube wiring behind a fixture, the inspector sees the new run before the plaster is patched, which is also a good record to keep for your insurer and for a future buyer.

Baltimore County permit file

PERMIT OFFICE

Baltimore County Permits, Approvals & Inspections, 111 W. Chesapeake Ave, Towson · 410-887-3900

CODE IN FORCE

2023 NEC for permits issued after Aug 31, 2023

UTILITY

BGE

01

Permit

We apply for the permit before work starts, when the job requires one.

02

Work to code

We wire it to the code your county enforces, with the right parts for the job.

03

Inspection

The county inspector checks the work before walls close or the power is restored.

04

Walkthrough

We show you what we did, what passed and anything worth planning for next.

Same service nearby

Lighting installation nearby

Reviews

What neighbors say

Posted on Google Google
Kyle Harbaugh profile picture
Kyle Harbaugh
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I called Snapper Electric for an after-hours service late on a Sunday evening. Unfortunately, they weren't able to make it to my house but diagnosed the problem over the phone and got me on the right track calling BGE. This is what great customer service is all about! In the past, I've used them from everything from light installs to outlet rebuilds. All the work has always been done to perfection.
Posted on Google Google
Alice Alice profile picture
Alice Alice
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Replaced our outdated electrical panel and fixed a few wiring issues the same day. Professional, punctual, and everything works perfectly now.
Posted on Google Google
monte combs profile picture
monte combs
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
And his service remains 5 star. This was the first time that I have used Mike but rest assure it will not be the last. He was quick, he was honest and his work was exemplary and his prices are more than reasonable. Keep up the good work SNAPPER!
Posted on Google Google
Linda Diaz profile picture
Linda Diaz
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Maryland.... NEED AN ELECTRICIAN?..... Look no further! Words escape me at the amazing customer service delivered by Mike Cliffe(Master Elec.) at Snapper Electric. I called to inquire about services to uninstall my Chargepoint EV home charger. Michael said he can come by to work on this for me. He asked me to send him pics so he can advise properly. I sent the pics and Michael responds back with where to look and how to uninstall. I was shocked! No call charge. No service charge. Just the instructions and he wishes me an amazing weekend!!! Honest and great customer service 👍
Posted on Google Google
Mark C profile picture
Mark C
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Mike came out, quickly diagnosed the problem and fixed it very quickly. He is great, and very reasonably priced! Would definitely use them again!
Posted on Google Google
M G profile picture
M G
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great work done after a thoughtful discussion on all options
Posted on Google Google
Steve Somers profile picture
Steve Somers
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I bought a new electric range and didn't realize the old one was hard wired in. I called Mike and he was out right away to get a new outlet installed for the new range. I highly recommend!! Super Fast and Professional!!!
Posted on Google Google
John Brodrick profile picture
John Brodrick
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I have had them do a few jobs for me including installing a generator outlet for the house and some wiring throughout the house. He took the time to explain options and what was best to fit my needs. Overall very professional, on time and did great work. Highly recommended.
Posted on Google Google
Ricky Godbolt profile picture
Ricky Godbolt
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I highly recommend Snapper Electric.
Snapper defines quality and service! Mike did a fantastic job for us and has done major projects in the past (whole house re-wire). They offer quality service, fair pricing and the peace of mind that they did it right the first time. I highly recommend Snapper for all your electrical issues and needs.
John Eisner
Whole-house rewire
Mike was not only on-time, but early to the appointment! Very responsive by text messages which is the best way to get hold of me. I had a problem with bathroom lights and multiple outlets that stumped me - I tried but couldn't figure it out myself. I expected him to take all morning but within 20 minutes he said "I found the problem!" and had it fixed!
Clayton Jones
Google review
My wife was home during installation. She was pleased with the time he took with her to discuss and plan light placement. I was told he worked cleanly and diligently. He was very respectful of our home.
Brian Ferullo
Bel Air, MD

From the blog

Read more about this

How to tell if it’s still in your walls, and what to do about it.
When a fixture can be converted and when it should be replaced.

FAQ

Lighting questions from Towson homeowners

Yes. We plan the route through the attic or from below, mark each location to miss the joists, score the plaster and cut slowly so it doesn’t crack past the opening. Slim LED fixtures need only a few inches of depth. Some plaster ceilings are better suited to fewer, well-placed fixtures or wall sconces, and we’ll tell you if yours is one of them before any cutting starts.
It should be fixed rather than ignored. Insulation that cracks when moved can expose bare conductor inside a metal box, which can cause a short or a shock. We don’t reconnect a new fixture to wire in that condition. Usually we replace the run back to a junction or switch, fit a proper box and then hang the fixture. If it turns up elsewhere, we talk about a wider look at the wiring.
Usually, yes. A box from that era was meant for a light, not a spinning fan, so it comes out and an expanding fan brace goes in between the joists, often slid through the existing fixture hole. If the ceiling is low, we use a flush-mount fan. If you want separate fan and light control, we check whether there’s a path to bring an extra wire down from the switch.
Often, with the right choice. Many switch boxes in older homes have no neutral wire, and a lot of smart switches need one. Some models work without a neutral, and in other cases we can run one. Three-way switches and very small boxes can also limit what fits. We open the box, check what’s there and recommend a switch that will work reliably with your fixtures.
Yes, inside the unit. We confirm the association’s rules on work hours, elevator use and parking before scheduling. Kitchen and bedroom lighting is the usual request. If the ceiling is concrete, recessed lights may not be possible, and we look at surface LED fixtures or track lighting instead. Problems in the building’s common wiring go to management, and we’ll tell you if that’s where the fault is.
Usually. The county’s permit rule reaches nearly all electrical work, which includes new fixture spots, new circuits and wiring replaced behind an old fixture. The office is right here in Towson on W. Chesapeake Ave. We file the permit when the job requires one and are there for the inspector’s visit.
Michael Cliffe, owner of Snapper Electric

Reviewed by Michael Cliffe, Owner · Maryland State Licensed Contractor, License 7788

Written by the Snapper Electric team · Last updated October 25, 2026

Electrical work can be dangerous. The information on this page is general guidance for homeowners in Maryland and is not a substitute for an on-site assessment by a licensed electrician. Always turn off power at the breaker before touching any wiring, and call 911 if you smell burning, see sparks, or have an active electrical fire.

Ready when you are.

Call, text, or send the form. We’ll tell you what we see, what it means for your home, and what it costs before any work starts.
Office hours Mon–Sat 8 AM–5 PM · 24/7 for electrical emergencies
Snapper Electric turtle mascot